Points to Remember Before You Clean Your Air Filter

 

Cleaning an AirGuard air filter has proved to be a cost-effective solution for some. When you reuse a filter after cleaning it properly, it lowers down the operating cost and saves you from buying a new one for some time. But some air filters manufacturers warn against cleaning and reusing a filter. Here are some facts that you should check out before you decide.

 

1. If you properly use the restriction gauge and adhere to change guidelines provided by OEM, your home air filters Roseau are more likely to last longer. Also the system that your filter is protecting will have maximum lifespan.

2. After you clean an air filter, its dust holding ability is much reduced than that of a new filter. In fact, after the very first cleaning, the filter loses this capacity up to 25% and also some additional damages follow after frequent cleaning. As a result, there develops potential complications like accidental dust absorption.

 

3. Dustlock home filters that are on highway should never be cleaned as the contaminants absorbed from the road is extremely difficult to get out from the filter media. So the contaminants left in the filter result in discoloration and reduces dust bearing capacity.

4. If you have secondary air filters, you should never clean them. They act as the last layer of protection for your air system. They need to be replaced after the primary air filters are changed at least thrice. Secondary air filters last up to one year.

Now, if your air filter is washable, you should remember the following things before you perform the task-

 

i) Cleaning an air filter can be risky. You should be well aware of the care and handling that it requires. Or you can hire a person who knows this job well.

ii) Choose a skilled and experienced air filter service provider who uses right cleaning and handling techniques effective for your machine.

iii) So, if your air filter needs a cleaning, you should keep all these points in mind. If you are not confident enough to do it yourself, it’s better to leave this task to an experienced technician.